**** DONE: Revell 1/48 P-40B RAF 112 Squadron in Egypt in 1941 MTO Group Build

[B-17engineer]

its nothing though! I promise!

 

[Wurger]

Here you are. Ask me if you have any doubts.

 

[B-17engineer]

Ok I will attempt that in a second!

 

[lesofprimus]

Frickin GREAT tutorial Wojtek, outstanding....

 

[Wurger]

THX Bud...

 

[B-17engineer]

Here you are

 

[Wurger]

OK. you can use this.But do it gently. Take a pic when you start please..I want to estimate if it can be for farther sanding.

 

[B-17engineer]

So that leaves me with a question, in picture three I sand everything off the left side and then go on with the right side?

 

[B-17engineer]

OK. you can use this.But do it gently. Take a pic when you start please..I want to estimate if it can be for farther sanding.

A picture of the stcik or what I'm sanding?

Then post it when I finish? Or at the start and post it.

 

[Wurger]

A picture of the stcik or what I'm sanding?

Then post it when I finish? Or at the start and post it.

No , no Just when you start. and what you are sanding pic please.

To answer to your question above, yes almost all putty on the left side of the join firstly.

 

[B-17engineer]

Ok, will go do that.

 

[B-17engineer]

Went pretty well! This is the left side of the fuselage.

 

[Wurger]

OK. Continue....

 

[B-17engineer]

With the other side?

 

[Wurger]

With the side and the other one too.The amount of the putty at the join should be pretty unimportant.

 

[B-17engineer]

Okay, I'll get do the other side.

 

[Wurger]

Then pics of both sides please.

 

[B-17engineer]

But I just posted one of the side I sanded. So just one side then?

 

[Wurger]

OK. Show the second side now.

 

[B-17engineer]

Alright I'll go take a picture.