**** DONE: Revell 1/48 P-40B RAF 112 Squadron in Egypt in 1941 MTO Group Build (1 Viewer)

[B-17engineer]

Shall I draw the circles now ?

 

[Wurger]

OK. Now use a thin marker and a ruler if you have and draw something like that.Of course without these arrows. Also you can use a pencil if it can draw on the card.
Firstly draw the vertical line remembering about margins as these card edges are a little bit rounded after sanding.
Secondly draw the horizontal line starting at the middle of the vertical one.The angle between them should be 90 degrees, right?

 

[B-17engineer]

Correct, do I have to worry about there not being enough room for the circle?

 

[Wurger]

Try to put the drawing in that way to have enough room for these circles on the top half of the card.You need two circles of smooth surface without any letters etc..

 

[B-17engineer]

How's this?

 

[B-17engineer]

I fixed the line so it's straight

 

[Wurger]

Harrison you have to do it precisely.And the drawing has to look like in the pic I uploaded. Use a ruler to pencil these lines that have to be straight.

 

[B-17engineer]

Whose Herrison?

Here.

 

[Wurger]

The horizontal line has to be longer. You have to put on the line two circles. Look at the pic below. Of course you can draw the second circle closer to the first one. But leave a gap between them because you have to cut them off with scissors. But pencil them with the compass at the moment only.


ANd so sorry I hit incorrect key.

 

[B-17engineer]

OHHHHH two circles....!

No problem, I'm just kidding.

 

[Wurger]

Of course show me please your work.

 

[B-17engineer]

.

 

[Wurger]

Good.... Now circles.

 

[B-17engineer]

OK. I go do that

 

[Wurger]

OK.

 

[B-17engineer]

Well that was hard....

I must go now, but here is this. I will not be here tomorrow, well maybe for an hour or two. Many thanks for your help! Have a nice night.

 

[Wurger]

OK. No problem I'm busy tomorrow as well. Then I have to be at work on Saturday. But I'll leave you some instruction for farther work.
Now I can say the first circle is OK. But the second one has to be corrected.I mean it has to be penciiled again.

Take care....

 

[jamierd]

wurger your patience and willingness to help others is humbling i salute you my friend

 

[vikingBerserker]

As someone benefiting from this thread as well, I totally agree.

 

[B-17engineer]

Yes, I really, really appreciate Wojtek's help. It means a lot