Updates showing white wash applied. First, a coat of Future was applied 3 days ago and allowed to dry fully. Next, Polly Scale flat white thinned down 50% was sprayed on with with a fine tip airbrush in a patchy pattern with continuous reference to photo and profiles. Once the white was dry, a light sand with wet 400 grit paper was done to simulate a bit more wear of the white, especially on the tops of the wings around the cockpit and filler caps.
I orginally was going to apply the decals first but decided against it. Once these are on, I'll do a little more white washing with a brush around the crosses to simlaute these having been painted around by hand.