- Thread starter
- #41
fam43
Senior Airman
A coat of primer to check for flaws.
Time to mount the upper wings and exhaust pipes.
Time to mount the upper wings and exhaust pipes.
FW 190 V18 1:32 modified Dora
- Thread starter fam43
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Lucky13
Forum Mascot
Looking great Michael!
Airframes
Benevolens Magister
Certainly does.
Night Fighter Nut
Master Sergeant
Did someone mention P-61
You're doing such an excellent job. Just Brilliant!
You're doing such an excellent job. Just Brilliant!
Looking Good!!
- Thread starter
- #46
fam43
Senior Airman
Thanks for all your compliments,
but the show must go on. By far the most demanding job are the exhaustpipes. I took plastic tube and inserted copperwire though to fix the bending I had to do. That's the result:
The engine cowl is from the newtool Dora. Later I changed it to the oldtool Dora which gives a more weighty look.
but the show must go on. By far the most demanding job are the exhaustpipes. I took plastic tube and inserted copperwire though to fix the bending I had to do. That's the result:
The engine cowl is from the newtool Dora. Later I changed it to the oldtool Dora which gives a more weighty look.
Last edited:
ellis995
Staff Sergeant
outstanding work Michael
Airframes
Benevolens Magister
Yep, I agree, more superb work!
Crimea_River
Marshal
Tony Hill
Tech Sergeant
Great stuff (picks up jaw from ground)
Darryl
Darryl
Night Fighter Nut
Master Sergeant
And the fans are going wild....
Great job..
Great job..
- Thread starter
- #53
fam43
Senior Airman
Hi all,
just returned from an exhibition event over the weekend. Time to do an update.
I found a spinner of the venerable P51 B of Revells 70-ties edition. Will try to change it to the correcgt V18 sinner.
just returned from an exhibition event over the weekend. Time to do an update.
I found a spinner of the venerable P51 B of Revells 70-ties edition. Will try to change it to the correcgt V18 sinner.
- Thread starter
- #55
fam43
Senior Airman
That's the final shape of the spinner. The props were made from three Spitfire blades and one from a 109 (old Revell and Hasegawa stuff).
I cemented plastic card on the backside of each prop and cut out the correct outline. the rest is 2K putty and alot of sanding. The prop bosses are made of aluminium tubing.
More sanding is needed on the props!
I cemented plastic card on the backside of each prop and cut out the correct outline. the rest is 2K putty and alot of sanding. The prop bosses are made of aluminium tubing.
More sanding is needed on the props!
Excellent work mate!!
ellis995
Staff Sergeant
i echo Waynes words
Night Fighter Nut
Master Sergeant
You're doing an excellent job!
superb job
