Hobbycraft Dornier Do-17Z 5K+EA BoB GB

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

If you mean that long piece on the bottom left in the pic, then that should be a slot I think. On the real thing, it would be a circular opening, with a metal ring around it, part of the rest of the framework, and probably a canvas shroud over the outside, onto the gun barrel, as in the guns on Wayne's Ju88.
 
Heat up some plasticard a poke a pointed something! into it to create a cone and cut it to shape....OR create a cone shape from some sprue or the like and drill a hole through it very carefully for the gun barrel as I did..I also did some filing and sanding to create the pattern on the cones....
 
Or alternatively, put the gun in place, and mould the cone-shaped shroud around it, using Milliput. This can then be 'textured' to represent the folds in the canvas, and will also hold the gun in position.
 
With school starting in 11 days I've been trying to work as much as I can so I'll be in good shape when school comes and grinds modeling to a halt!

So I added thee Bomb aimers seat...

Added radios to the cockpit

Added instrument panel

Landing gear looks big to me but thats the coorect parts and assembly...

Also the tire I have to white wall
 

Attachments

  • P8150571.JPG
    55.1 KB · Views: 90
  • P8150572.JPG
    60.1 KB · Views: 86
  • P8150573.JPG
    77 KB · Views: 89
  • P8150574.JPG
    84.6 KB · Views: 95
  • P8150576.JPG
    78 KB · Views: 89
  • P8150577.JPG
    73.3 KB · Views: 89
  • P8150578.JPG
    97.1 KB · Views: 88

Users who are viewing this thread