Hi all, after some absence, I'll make up time ...
During the detailed rocket launchers I found interesting details and
a little alarming !!
This was a beautiful picture that became my reference to improve the piece.
The model brings a poor detail of the rocket launchers.
So to make the adjustments ...
...
everything was going great until instructed, then I noticed that something was wrong ...
Following the silhouette of the paper (left green circle), put the piece on the instructions (green right circle) in the position it would go.
Previously I followed the indications to put the pieces of the ends in place.
(the rear cover of rocket launchers right - green circles - and left ends with holes to detail)
Now came the alarming error in the instructions !!
1. If you look at the last picture, the longer end of the rocket launcher pointing backwards.
2. This would make the output of the rocket is nearly the same distance from the guns of the wings.
3. Looking at reference photo, the strap indicated in red circle made me see that the position indicated by the instructions of rocket launchers, is the other way around, and reversing the direction and I would stay in the correct position and distances! !
... so rotated through 180 ° the pieces !! ....
And now if it looks like they should be.
Well, ...
I want to practice how to make my own adjustments, isn´t ?
, so thanks to the error not seen it in time, I give myself to the task of reversing the ends stuck in advance to correct them.
Let talk the pictures !!
... known technique to join the pieces ...
We can see on the left the original part according to the instructions and corrected right piece !!
Only than in the instructions pretend that rockets shoot back !!
... thus were left ... and only a little putty and sanded
But this will be at a future meeting.
Thank you for your visits and much more for your comments and feedback.
See you soon !!
SANCER