**** DONE: Revell 1/32 Ju88A-5 4D + MR 7/KG30 MTO Group Build

Junkers88A1 · Jul 17, 2010

hi

not much of that..have some of the one in england..thats about it..
will look and see what i find. but i am in sweden right now but i am sure you will come thru with this

Aaron Brooks Wolters · Jul 17, 2010

Wayne, can you use a needle and heat it and carefully stick the canopy to make a mounting point? It will take a steady hand but with your talent I'm sure it won't be very difficult.

Wayne Little · Jul 18, 2010

Aaron Brooks Wolters said:
Wayne, can you use a needle and heat it and carefully stick the canopy to make a mounting point? It will take a steady hand but with your talent I'm sure it won't be very difficult.

I was thinking more along the lines of a very small fine drill...actually!

Lucky13 · Jul 18, 2010

Just get on with it will ye......stop fannying about, I want more pics!

Aaron Brooks Wolters · Jul 18, 2010

You could use the hot needle as a center punch per say to make a small mark to help keep the drill bit centered. That way you are less likely to slip with the drill bit and scratch the plastic.

Airframes · Jul 18, 2010

Masking tape over the spot, a small pin mark from the scalpel, to mark the spot and as a 'pilot hole, then drill. If bit slips, it hits tape, not clear part.

Wayne Little · Jul 18, 2010

Thanks for the tips fellas...

Aaron Brooks Wolters · Jul 18, 2010

Just trying to exercise my brain.

Wayne Little · Jul 19, 2010

Ok, after about an hours messing about I have created the Nose window mounted compass box...

2 small squares of plastic card glued together then shaped roughly into a cube/box about 2mm square!!
Then drilled the back and attached a tiny brass rod, painted the box and found a left over dial from my etch set for the front and I think I have it?...well pretty close anyway!
Have predrilled a small hole in the nose glass...very carefully.

Probably add one more tiny bit of card to the back to help support the compass box....

jamierd · Jul 19, 2010

every posible superlative has been used to describe your work Wayne so i am going to create a new one it is just
WAYNE meaning it is so above and beyond it is godlike

Vic Balshaw · Jul 19, 2010

Well done that man, looks very real Wayne.

Wayne Little · Jul 19, 2010

Thanks Guys!

Lucky13 · Jul 19, 2010

Agree.....very much WAYNE!

B-17engineer · Jul 19, 2010

What the hell....

Great work!!!

T Bolt · Jul 19, 2010

Very nice Wayne!

Wayne Little · Jul 19, 2010

Couple of size perspective shots....

T Bolt · Jul 19, 2010

How on earth did you manage that with out loosing it 3 or 4 times! I had no idea it was that small!

Lucky13 · Jul 19, 2010

That's his fifth one......(please let it be his fifth.....can't take this any more! )

B-17engineer · Jul 19, 2010

Don't sneeze!!!

Crimea_River · Jul 19, 2010

Very nice Mr. Little.

**** DONE: Revell 1/32 Ju88A-5 4D + MR 7/KG30 MTO Group Build

Staff Sergeant

Brigadier General

Moderator

Forum Mascot

Brigadier General

Benevolens Magister

Moderator

Brigadier General

Moderator

Attachments

Senior Airman

Major General

Moderator

Forum Mascot

Colonel

Colonel

Moderator

Attachments

Colonel

Forum Mascot

Colonel

Marshal

Users who are viewing this thread

Similar threads