Airframes
Benevolens Magister
Nice work Lewis. That engine compartment looks just like the one I worked with - heavy lumpy bits and dirty.
T34/76 Kursk armor GB
- Thread starter magnu
- Start date
B-17engineer
Colonel
Good work Lewis
- Thread starter
- #23
T Bolt
Colonel
Looks great Lewis!
Airframes
Benevolens Magister
That's looking very nice indeed Lewis. Think I'll have to try one of their AFV kits sometime soon.
Could you just clarify a couple of things for the judging stage?
Is the driver's hatch cover a scratch-built addition, and are those small 'lumps' in the centre of each hull grab rail some form of moulded detail?
Thanks mate.
Could you just clarify a couple of things for the judging stage?
Is the driver's hatch cover a scratch-built addition, and are those small 'lumps' in the centre of each hull grab rail some form of moulded detail?
Thanks mate.
vikingBerserker
Lieutenant General
Nicely done!
- Thread starter
- #27
Thanks for the kind words folks
Terry the drivers hatch is from the kit and the lumps in the middle of the grab rails are the attachment points which I will try to tidy up once they have had a good chance to set. Didn't want to snap them on the cutting mat.
Terry the drivers hatch is from the kit and the lumps in the middle of the grab rails are the attachment points which I will try to tidy up once they have had a good chance to set. Didn't want to snap them on the cutting mat.
Vic Balshaw
Major General
Hey Lewis, that's a great looking build and what detail your working with, a bit sad that much of it is tucked away inside.
Last edited:
Airframes
Benevolens Magister
Thanks Lewis. Thought you might have made the hatch, as it appears to be white in the pics.
- Thread starter
- #30
Cheers all.
Vic I hope to be able to get away with not gluing the upper hull to the lower so all the interior detail is not lost.
The hatch is white Terry I thought it was the inside when it was on the sprue so it had a coat of white along with the rest of the interior parts.
Vic I hope to be able to get away with not gluing the upper hull to the lower so all the interior detail is not lost.
The hatch is white Terry I thought it was the inside when it was on the sprue so it had a coat of white along with the rest of the interior parts.
Doing a good job there Lewis!
- Thread starter
- #32
B-17engineer
Colonel
Great Lewis!
T Bolt
Colonel
That track looks great Lewis!
Airframes
Benevolens Magister
Sure does, and nicely detailed too.
Lucky13
Forum Mascot
Super!
Vic Balshaw
Major General
It looks better every time I take a peek. Lewis, I take it that the track was mad up by linked parts and not one of these already mad tracks that I believe are a dogs bo**ocks to stick together.
Last edited:
- Thread starter
- #39
Thanks for the kind words and encouragement folks.
Vic the tracks are made up from 29 separate parts, two long strips that form the top and bottom, two short sections and the rest individual links. The kit provides two formers for the front and rear curves but I didn't find them a great deal of help. It's just a case of do a bit let it dry and then do a bit more and hope it holds together when you try to put the right curvature into it.
Vic the tracks are made up from 29 separate parts, two long strips that form the top and bottom, two short sections and the rest individual links. The kit provides two formers for the front and rear curves but I didn't find them a great deal of help. It's just a case of do a bit let it dry and then do a bit more and hope it holds together when you try to put the right curvature into it.
Vic Balshaw
Major General
You did very well then Lewis, very well
