Yes Wayne............. Me! Had that black funnel pressed tight against my gob!!!!!! Holerin like I was on fire.
Enough.... I say.
Well I found a new technique I may use another time, but this one was a waste, electrical wiring. The only one you can possibly see is the one across from the big hatch. The other? Well..... you have to be pressing your eyeball against the window across from it!!!!
What I did is used white sewing thread. Did several wraps around a card, slide them off and cut the loops, put some PVA glue on my fingers and pulled it thru the strands and twisted them together. Let them dry for a while. Drilled a little hole in the sides, or front, of the boxes, not too big, 0.6mm. Dipped an end into this Super glue and stuffed it into one of the holes and added a drop at the hole. When that set I cut this to length to reach the next hole, a drop on the bundle, stuffed it into the hole, added a drop. When these were set I added some thin S.G. to the length of the bundle to set it to shape. Used a marker for the black clips. Good effect and easier than using wires or solder wire. But a waste of time in this case.
Close to fitting the halves together.