going with more advances, identifications have painted white with wear I wanted, because I still have the explanation here apply another technique that surely will know but I guess someone did not know it.
wear and erosion, this kind of wear can be done two ways with hair spray or with very fine sandpaper, the more exaggerated priimera to wear is very high and the second is lighter.
But not anticipate more things we will step by step.
the first thing is to put the salt (as in the previous step), once the mask dries, it becomes not to soil's take painting and job loss.
after this occurs is painted white layer must be uniform but very lightly.
Once the paint dries hard brush removes salt
Once we removed the salt with the Spanish "cascarillado" of painting, I think in English is scrab painting, can be done with products such as AK-interactive, mig productions or other brands, but it is still a lacquer soluble or the like, for women this all have to spend at home hair spray, but this effect would be very laborious to give an appearance of wear but not too high, this technique is simple to apply, especially those using tamiya such as orange peel makes ...
use is very wearing sandpaper to give light strokes with no pressure on the target so that the color looks down on others and others who see white and color below, you get a water effect painting.
between the previous and this can be seen the effect of water has been accomplished in the queue from a top angle is nearly white and from a front or bottom corner is more green
the bottom is the same technique gives a uniform color is closer but the paint is worn, although I have no photos of this area I run out of battery in the camera before you can do photos, I put them tomorrow
an image gives the top
tomorrow more pics.