**** DONE: 1/72 PBY-5A Catalina RAAF 42 Sqn - Seaplanes / Floatplanes of WWII

Wayne Little · Jun 27, 2014

Vic's grey over spray is a good call very thin mix light passes to build it up to what gives you the desired effect....

mikewint · Jun 27, 2014

On the Black Widow I used a diorama paint named "DUST" Very, Very thin. I used a small empty Testor's paint bottle filled with thinner (4 mL) and dipped a brush into the paint and cleaned the brush in the thinner. With a very thin paint you can spray as many times as you want to get the effect you want but you can't remove "too much"

parsifal · Jun 28, 2014

hi guys. I will slink away and have a think about the dusting issue, but i am very appreciative of all your advice and expertise.

The bad news is that my detachable canopy idea didnt work. no harm done, other than some lost time and bruised pride, but it does mean i will need to button up the canopy conventionally, and limits visibility pretty badly. on the plus side, it reduces the internal details by a large amount.

at last i had some daylight to take some photos, along with one or two progress shots that i took as i was building. Reasonably happy so far

fubar57 · Jun 28, 2014

Wayne Little said:
In our competition, we are pretty flexible Michael, however I would like to see the fitted canopy in place to see you have done the work to make a good 'fit' and then without in your final pics so the internal detail you wish to display can be seen.

Michael, if I'm reading Wayne right, you don't have to glue the canopy on but they would like to see it fitted for the final photos to make sure it sits properly without any gaps. Your model is coming along nicely and I should have posted these photos earlier. A black walkway extends down the center of the hull full length. The waist gunners stood on a non-skid walkway. I used Tamiya Rubber and then dry brushed it with grey.

I hope these aren't too late and are of some help to you.

Geo

Vic Balshaw · Jun 28, 2014

That is looking good Michel and a nice pic of the guts from Geo.

Wurger · Jun 28, 2014

Wayne Little · Jun 28, 2014

Spot on George!

Nice progress there Michael

mikewint · Jun 28, 2014

Michael, with all the above nice work and an excellent start

parsifal · Jun 30, 2014

Sorry guys for the very slack reporting. ive spent the last two days doing some further internals. Ive resigned myself to the fact that once buttoned up, most of what Im doing wont be visible, but I really enjoy this scratch building stuff. Anyway, Ill post a couple of progress shots in a minute. very much a work in progress at the moment, so looking a little rough, but Im happy so far.

parsifal · Jun 30, 2014

These are the progress shots. i had some difficulties. The rear bulkhead was mis-positioned and i had a deveil of a time with the engineers tower. im hoping when its all dry i can clean it up a bit.

The wheel bays are nothing like the real thing which means the galley area has to be extemporised, and i also had to be a bit creative in the positioning of the engineers ladder.

A little flamboyance...there is a readable map on the navigators table and a pair of spotting binoculars....but i forgot to leave enough room for the navigators radar scope.

i also had a lot of problems getting the bulkehead profiles the right size. I made a mistake with the rear bulhead leading into the sleeping area....doesnt have a watertight door like ive shown. i might go back and fix it, but i havent made up my mind yet

fubar57 · Jun 30, 2014

Nice job on the ladder and seat Michael.

Geo

mikewint · Jun 30, 2014

Nice progress

Crimea_River · Jun 30, 2014

Good work Michael.

parsifal · Jun 30, 2014

ive said it before....but those close ups are absolutely brutal. it looks much better and cleaner in the flesh.

im still debating whether to widen the hatchway for the rear bulhead. im basing the layout on that PBY cutaway project that is on display in the US.

Next job is to fit the bunks in the rear compartment, or take out the rear bulkhead and modify it. then i might add some details to the rear observation area and the forward gunners station. Then its clean up time. Ive made some additional chairs and the fuel cylinders for the Galley there are also some fire extinguishers map bags and toll boxes to put into the interior.

Its a far cry from a faithful build, but its better than what the kit came with IMO. I want to include in my finished shots some extra shots of the internals before i button the whole thing up. most of what im doing will not be seen otherwise.

Vic Balshaw · Jul 1, 2014

Nice bit of modelling there Michael and your enjoying it.

Wildcat · Jul 1, 2014

Nice work mate

Wayne Little · Jul 1, 2014

keep up the good work Michael.

parsifal · Jul 1, 2014

At the moment Im trying to work out a way of making realistic looking canvas bunks . How to make plastic look like canvas or bedsheets......

fubar57 · Jul 1, 2014

Though it might be difficult in your scale(or not), I've read about mixing white glue with water, wetting a tissue with said substance, draping it over a former until dry and then cutting to final shape. I've never used the process but have seen some very nice results in model magazines, ie; tarpaulins draped over uncovered engines and covers for tank storage bins.

Geo

Gnomey · Jul 1, 2014

Looks good so far Michael!

**** DONE: 1/72 PBY-5A Catalina RAAF 42 Sqn - Seaplanes / Floatplanes of WWII

Moderator

Captain

Colonel

Attachments

General

Major General

Siggy Master

Moderator

Captain

Colonel

Colonel

Attachments

General

Captain

Marshal

Colonel

Major General

Major

Moderator

Colonel

General

Globetrotting Surgeon General

Users who are viewing this thread

Similar threads