Alright, here you go. About 2 hours of airbrushing produced this result - which I'm maybe 70% happy with. I need much more practice with this technique. The squiggles are RLM 76 and look good to me in some places and other spots are kind of botched up.
Pics 1 and 2 Overall shots from the quarter and front. Overall looks not too bad but there are spots where the squiggles are too wide, giving a bit of a patchy look. To keep the pattern straight along what will eventually be the demarcation between the upper camo and black undersides, I had applied some masking tape but removed it before these photos were taken. Edit: BTW, the flaps are just taped on right now so that the pattern could be sprayed continuously over them. They'll be posed in the deployed position when done.
Pic 3 Starboard wing which turned out pretty good. You can still see some places where the paint was too thinly applied. I'll go over these later when my nerves have calmed down.
Pic 4 Not so nice. Large variation in line thicknesses and paint thickness. I'll probably do this area over.
Next will be painting the undersides and rudders a coat of slightly lightened black. Thanks for your comments. Anyone with tips on this technique, please chime in. Constructive criticism is very welcome!