- Thread starter
- #81
N4521U
Colonel
Thanks for all the encouragement.
I've done some more on the back seat. But first..... the plastic on this kit is crap! Super glue would not hold the pvc card in place. As soon as I started shaping it to the contours it popped off. So a piece of the same kit went in. Got some big cracks to fill. And some shaping to do as well on that bottom trailing edge of the wing......
I made a back wall to fit the two haves, they are not even close to being alike. Then I cut the center out to for a rib. Then uprights for the seat support rails, then a headrest, don't want the KGB agent to be uncomfortable, do we. The seat is ready to install. All the new bit I will paint light blue, for that Carnaval look!
I've done some more on the back seat. But first..... the plastic on this kit is crap! Super glue would not hold the pvc card in place. As soon as I started shaping it to the contours it popped off. So a piece of the same kit went in. Got some big cracks to fill. And some shaping to do as well on that bottom trailing edge of the wing......
I made a back wall to fit the two haves, they are not even close to being alike. Then I cut the center out to for a rib. Then uprights for the seat support rails, then a headrest, don't want the KGB agent to be uncomfortable, do we. The seat is ready to install. All the new bit I will paint light blue, for that Carnaval look!